- HOME
- COMPANY
- PRODUCTS
- INDURSTRY
- SUPPORTS
-
TOOLS
- Thermocouple Wire Data Sheet
- EMF Conversion Table
- Speed of Response
- RTD vs Thermocouple Comparison Chart
- ASME PTC19.3 TW-2010
- ASME B36.10-B36.19-Pipe Schedules
- ASME B1.20.1-1983-Pipe Thread
- NPT Pipe Thread Size
- American Wire Gauge (AWG)
- Standard Wire Gauge (SWG)
- Unit Conversation
- Thermocouple Colour Code Connection Chart
- NEWS
- CONTACT
lndustrial gauge pressure transmitter
PPT101 Series monosilicon pressure transmitter is a highperformance pressure transmitter with internationalleading technology meticulously designed by Pyrotechinstrument company,using the world's most advancedmonosilicon pressure sensor technology and patentencapsulation technology. Monosilicon pressure sensorlocates on the top of the metal body and stay away fromthe medium interface to realizes mechanical isolation andthermal isolation. Glass sintering sensor wire realizes highstrength electrical insulation of metal base and improvesthe capability of flexibility of electronic circuit and transientvoltage resistance protection. All these original encapsula--tion technologies enable PPTS to easily cope with extremechemical occasion and mechanical load, and own strongresistance to EMl, sufficient to respond to the rigorousindustrial environment applications, which are the genuineinvisible instruments.
Main parameters
Pressure types | Gauge pressure |
Measuring range | 2kPa-40MPa, please refer to theordering information chapter |
Output signal | 4-20mA,4-20mA+HART, customer |
Reference accuracy | ±0.1% URL, optional 0.075%URL |
Field of application
Pressure, level
Measuring medium
Liquid, gas, or steam level, density and pressure
Approvals
Measuring range and limit
Nominal value | Smallest calibratable span | Lower range limit(LRL) | Upper range limit(URL) | Overload limit |
40kPa | 2kPa | -40kPa | 40kPa | 1MPa |
250kPa | 12.5kPa | -100kPa | 250kPa | 4MPa |
1MPa | 50kPa | -100kPa | 1MPa | 6MPa |
3MPa | 150kPa | -0.1kPa | 3MPa | 15MPa |
10MPa | 500kPa | -0.1kPa | 10MPa | 20MPa |
40MPa | 5kPa | -0.1kPa | 40MPa | 80MPa |
Above measurement range can be replaced by kg/cm², MPa and kPa units .Which can provide other measurement range according to the requirements. Adjust requirements: lower range value (LRV) and upper range value (URV) can be adjusted within the scope of the upper and lower range limit, smallest calibratable span≤|URV-LRV| ≤ upper range limit |
Standard specifications and reference conditions
Test standard: GB/T28474 / IEC60770; Zero based- calibration span, Silicon oil filling, 316L stainless steel isolated diaphragm, 4-20mA analog output.
Performance specifications
The overall performance including but not limited to 【reference accuracy 】,【environment temperature |
Typical accuracy: ±0.1%URL |
Stability: ±0.2% URL/ 5 years |
Performance specifications
Standard and reference conditions, including linearity (BFSL), hysteresis and repeatability. calibration temperature: 20 ℃ ± 5 ℃ | |||
Linear output accuracy | TD≤10(Note1) | ±0.1%URL | Nominal value: 40kPa,250kPa,1MPa,3MPa,10MPa,40MPa |
10<TD<20 | ±0.01% URL | ||
Note 1: TD is Turn down, TD=URL/ |URV-LRV| |
Power supply effects
Zero and span change should not be more than ± 0.005% URL/V when power supply changes in 10.5/16.5-55VDC
Mounting position effects
Apply to any position. Max value lower than 400Pa can be corrected by zero clearing function.
Vibration effects
According to GB/T 1827.3/IEC61298-3 tests, <0.1% URL
Output signal
4-20mA two wire. Customers can choose linear output or square root output. Digital process variables superimpose on 4-20mA signal and apply to any hosts with HART protocol.
Ambient temperature effects(Typical)
➣ Within the range -20-80 ℃ total impact
➣ ±(0.1+0.15TD)% URL
Insulation resistance
≥20M Ω@, 100VDC
Damping time
Total damping time constant: equal to the sum of damping time of amplifer and sensor capsule |
Damping time of amplifer: 0-100S adjustable |
Diaphragm capsule (isolated diaphragm and silicon oil filling) |
Startup after power off: ≤6S |
Normal services after data recovery: ≤31S |
Weight
Net weight: about 1.56kg ( without mounting bracket and process connection adaptor )
Environment condition
Items | Operational condition |
Working | -40-85℃, integrated LCD display : -20-70℃ |
Storage temperature | -40-110℃, integrated LCD display: - 40-85℃ |
Media temperature | Silicon oil filling: -40-120℃ |
Working humidity | 5-100% RH@40℃ |
Protection class | IP67 |
Dangerous condition | ExiaIICT4(GYB16.1962X) * |
* Only for 4-20mA output |
Power supply
Item | Operating conditions |
Standard/flame proof | 10.5-55VDC |
HART protocol | 16.5-55VDC, communication load resistance 250Ω |
Load resistance | 0-2119 Ω for working condition, 250- 600Ω for HART protocol |
Transmission distance | <1000m |
Power consumption | ≤500mW@24VDC, 20.8mA |
Power supply and load requirements
EMC environment
NO. | Test items | Basic standards | Test conditions | Performance level |
1 | Radiated interference | GB/T 9254/CISPR22 | 30MHz-1000MHz | OK |
2 | Conducted interference (DC power port) | GB/T 9254/CISPR22 | 0.15MHz-30MHz | OK |
3 | Electrostatic discharge immunity test (ESD) | GB/T 17626.2/IEC61000-4-2 | 4kV(Contact ),8kV(Air) | B(Note2) |
4 | Immunity to radio frequency EM-fields | GB/T 17626.3/IEC61000-4-3 | 10V/m(80MHz-1GHz) | A(Note1) |
5 | Power frequency magnetic field Immunity | GB/T 17626.8/IEC61000-4-8 | 30A/m | A(Note1) |
6 | Electrical fast transient / Burst Immunity | GB/T 17626.4/IEC61000-4-4 | 2kV(5/50ns,100kHz) | B(Note2) |
7 | Surge immunity requirements | GB/T 17626.5/IEC61000-4-5 | 1kV(Line to line) 2kV(Line to ground) | B(Note2) |
8 | Immunity to conducted disturbances | GB/T 17626.6/IEC61000-4-6 | 3V(150kHz-80MHz) | A(Note1) |
(Note 1)Performance level A: The preformance within the limits of normal technical specifications. |
Specific menu
Transmission module type
Output signal | Local control |
PyroTech Instrument Pty Ltd
Address: 7 Yamma Street Sefton NSW 2164, Sydney Australia.
China Office
Address: Room 401, Building 9, Jinbin Ruicheng, Jinbin Industrial Park, Wuqing District, Tianjin
客户留言
Description:
|